Yamaha 02R Owner's Manual - Page 260

150 Groups and Pairs Pairing Channels 1. Press the [PAIR] button. Adjacent channels can be paired for stereo operation. This makes it easy to work with stereo signals, because you only have to adjust one channel to control both left and right signals. The 02R allows you to link the input PAIR channels - MIC/LINE 1 through 16 - the tape return channels - TAPE 1 through 16 - and the auxiliary send channels AUX 1 through AUX 6. The PAIR display function appears. Channel Pair Display Screen There are two screens in this function. You may have to press the [PAIR] button again to get to the "Pair" screen. Shown below is the first PAIR display function - the channel Pair screen. You can pair the input channels - MIC/LINE 1 through 16 - and the tape returns - TAPE 1 through 16: 2. Use the CURSOR buttons to select a pair of adjacent channels and press the [ENTER] button to pair them. 1. Press the [PAIR] button again to select the "Aux Pair" screen. 2. Select a pair of adjacent auxiliary channels and press the [ENTER] button to pair them. Use the CURSOR buttons to select a channel pair and press the [ENTER] button to pair or separate them. Another method of pairing channels is to press and hold the [SEL] button of the first channel and then press the [SEL] button for the adjacent channel. The 02R will request you confirm the operation as shown below: Note: When you create a channel pair, all the parameters from the odd channel are copied to the even channel, overwriting the existing even channel settings. Digital Recording Console 02R User's Guide