Yamaha 02R Owner's Manual - Page 270
Solo, Status, Listen, Solo Level
View all Yamaha 02R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
160 Digital I/O, Setup, and Utilities Solo 1. Press the [SETUP] button. The SETUP display function consists of two screens: the "Solo" screen and the "Preferences" screen. SETUP Display Screen A SETUP display function appears. Press the [SETUP ] button until the "Solo" screen appears. Shown below is the first SETUP display function - the Solo screen: 2. Use the CURSOR buttons to select the desired "Mode" and press the [ENTER] button. 3. Use the CURSOR buttons to select a "Status" and press the [ENTER] button. Recording mode: 4. Select a "Listen" point with the CURSOR buttons and press the [ENTER] button. 5. Select the "Solo Level" control icon and adjust the level with the encoder wheel. Mixdown mode: Solo Functions • Status - This command determines which bus will be used when you press the [SOLO] button. If you select "Recording", the Solo bus will be used. If you select "Mixdown", the signals selected by the combination of the [SOLO] button and the [ON] buttons will be sent to the Stereo bus, and all other channels will be off. • Listen - This command is only functional in "Recording Mode". It selects the point the Solo monitoring signal will be taken from. You can select "Pre Fader" or "After Pan" as the monitoring points. 6. Use the CURSOR buttons to select the "Solo Safe" In "Mixdown Mode" the signal is always taken from after the pan and this function is greyed-out. channels and press the [ENTER] button to enable/disable the selected channel. • Mode - This command controls which channels are added to the Solo. If you select "Mix Solo", all channels that are selected ON will be added to output. If you select "Last Solo", the channel that was last selected ON will be output. If you only want to listen to one channel at a time in solo mode, select "Last Solo". • Solo Level - This rotary icon controls the output level sent to the Solo bus in "Recording Mode". In "Mixdown Mode" the signal is sent to the stereo bus and this icon is greyed-out. Digital Recording Console 02R User's Guide