Yamaha AW4416 Additions And Changes In Version 1.2, 1.3 - Page 18

Additions and changes in version 1.2, 1.3 Cue/Review function In version 1.2, the result of pressing the [FF]/[REW] key will change as follows depending on the status of the transport. r If you press the [FF]/[REW] keys during playback Cue/review will occur (in version 1.0, this occurred regardless of whether playing or stopped). r If you press the [FF]/[REW] keys while stopped Normal fast-forward or rewind will occur. Refer to: [FF] key / [REW] key → Operation Guide p.44 Automatic updating of the end point When the length of the song has changed as a result of an editing operation such as deleting or moving a track, the end point is now set automatically to the last location in the song. Refer to: End point → Reference Manual p.97 Use the [SEL] key to temporarily cancel fader grouping When fader groups are enabled, you can now temporarily exclude a desired channel from its fader group. This is convenient when you wish to adjust the balance of a specific channel within a fader group. The procedure is as follows. 1. Press the [SEL] key for the channel that you wish to temporarily exclude from the fader group. 2. Continue holding the [SEL] key, and operate the fader. The corresponding channel will be excluded from the fader group as long as you continue holding the [SEL] key. Refer to: Fader Groups → Reference Guide p.58 SEL SEL SEL SEL ON ON ON ON 3. When you are finished operating the fader, release the [SEL] key. When you release the [SEL] key, the corresponding channel will once again be part of the fader group. +6 +6 +6 +6 0 0 0 0 5 5 5 5 10 10 10 10 20 20 20 20 40 40 40 40 60 60 60 60 18