Yamaha DGX-660 DGX-660 Owners Manual - Page 71
Calling Up the Microphone Settings Saved to USER, MIC SETTING display.
View all Yamaha DGX-660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Connecting a Microphone and Singing Along with Your Performance MIC SETTING 1 display MIC ON/ OFF* Turns the microphone sound on or off. INPUT LEVEL Indicates the input level. PRESET* Calls up one of the preset settings (STANDARD, BRIGHTER and LOUDER) or the settings saved as USER. VOLUME Determines the output volume of the microphone sound. PAN Determines the stereo pan position of the microphone sound. EFFECT SEND REVERB CHORUS Determines the depth of the reverb effect applied to the microphone sound. Determines the depth of the chorus effect applied to the microphone sound. RESET Resets the values of parameters on MIC SETTING 1 and 2 displays to the default when one of the preset type is selected. When "USER" is selected, this resets them to the latest saved value. * The settings marked with * (asterisk) will be maintained even if you turn off the power. MIC SETTING 2 display NOISE GATE ON/OFF Turns the Noise Gate on or off. This effect mutes the input signal when the input signal falls below a specified level. TH. Adjusts the input level at which the (Threshold) gate begins to open. ON/OFF Turns the Compressor on or off. This effect holds down the output when the input signal from the microphone exceeds a specified level. COMPRESSOR TH. (Threshold) RATIO Adjusts the input level above which the Compressor is applied. Adjusts the compression ratio. Higher ratios result in a more compressed sound, making soft sounds louder, but reducing the dynamic range. OUT Adjusts the final output level. 3 BAND EQ EQ (Equalizer) is a processor that divides the frequency spectrum into multiple bands which can be boosted or cut as required to tailor the overall frequency response. Hz Adjusts the center frequency of the corresponding band. dB Boosts or cuts the level of the corresponding band by up to 12 dB. NOTICE • The settings here are lost if you turn off the power without executing the Save operation (See below). 4 Press the [EXECUTE] button to save the settings. The save confirmation message will appear on the display. NOTICE • The Save operation will delete the previously saved USER data. NOTE • To cancel this operation, press the [-] (NO) button. 5 Press the [+] (YES) button to actually save the settings. 6 Press the [EXIT] button to exit from the MIC SETTING display. Calling Up the Microphone Settings Saved to USER 1 Press the [MIC SETTING] button once or twice to call up the MIC SETTING 1 display. 2 Select "PRESET" by using the CATEGORY [r] or [f] button, then select "USER" by rotating the dial. Reference DGX-660 Owner's Manual 71