Yamaha DRX-1 Owner's Manual - Page 24
Language settings, Feature settings
View all Yamaha DRX-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Analog output Select Stereo, Surround or 3D Sound. Factory setting is Stereo. Surround : Select this setting when using equipment with a Dolby Surround Pro Logic decoder. In this setting the 5.1 audio channels (Dolby Digital, MPEG-2) are downmixed to a Dolby Surround-compatible 2-channel output. 3D Sound : In a setup without rear speakers (analog stereo output), this option remixes the six channels of digital multichannel (Dolby Digital, MPEG-2) into a two speaker output, while retaining the original audio information. The result is the listening sensation of being surrounded by multiple speakers. -- --- Digital output Analog output Night mode off on off Sound Stereo Surround 3D sound Connected audio system Amplifier or TV with two channel analog stereo Amplifier or TV with Dolby Surround or Dolby Pro Logic Amplifier with two channel digital stereo A/V receiver with Multi-channel decoder (Dolby Digital, MPEG, DTS) Digital out Off Off PCM only All Analog out Stereo Surround Stereo Stereo or Surround Night mode Night mode optimizes the dynamics of the sound with low volume playback for less disturbance in quiet environments.This only works for Dolby Digital audio on DVD video discs. r Language settings The preferred language can be adapted via the system menu bar.Also see 'Initial setup Language.' Settings can be changed for: - Playback audio - Recording audio - Subtitle - Menu (DVD Recorder system menus only) Recording audio You can set a preference for recording a stereo or secondary audio program. Select 'Stereo' or 'SAP.' This setting applies only if the broadcast contains stereo or SAP. SAP usually means a program is broadcast in a different language or with additional information. Feature settings Access Control Access Control contains the following features: Child Lock - When Child Lock is on, a 4-digit code needs to be entered in order to play discs. Parental Level - Allows the conditional presentation of DVD-Video discs rated according to Parental Level information. Change Country - Allows conditional presentation of DVDVideo discs rated according to country information. Change Code - To change the 4-digit code. Adapt disc format This option is only available when a DVD+RW/+R disc recorded on a different brand of recorder is loaded.You can adapt the menu to your own recorder. A DVD+RW/+R disc recorded on a different type of Recorder can play, but may not provide all features commonly available, such as the on-screen disc bar, disc settings menu, title settings menu, and editing. If the disc is not write protected, the disc format can be adapted to this Recorder, after which these functions are available. Status box The status box displays the current status of the Recorder and the disc type loaded (see 'Operation - On-screen display information - Status box').You can switch it on or off. Off = always Off. Status boxes do not appear. On = Status box appears with the system menu bar or is displayed temporarily (disappears after timeout) when changing the playback or record status. Factory setting is 'On.' Auto resume The Auto resume setting only applies to the last 20 prerecorded DVD Video and Video CD discs you played. If Auto resume is 'On,' playback will start from the point where it stopped the last time the disc played. When Auto resume is 'Off,' the Recorder will start playing from the beginning of a disc. In this case, you can still resume from the last point it stopped when appears on the TV screen by pressing . Factory setting is 'On.' 20 OPERATION