Yamaha DRX-1 Owner's Manual - Page 27
ENTER/OK, SYSTEM MENU, Time/Date Manually, ENTER, Cable/Antenna, SYSTEM
View all Yamaha DRX-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
English 6 Select the time zone if the DVD Recorder is tuned to the PBS channel of a different time zone than yours. 7 Confirm each entry with ENTER/OK. 8 To end, press SYSTEM MENU repeatedly to remove the menus. ➤ The time and date will be set by the specified channel the next time you switch to Standby power mode. ➤ The DVD Recorder downloads from the specified channel, if possible. If the specified channel does not carry date and time information, the message appears 'Clock not set.' The Automatic Time and Date screen will reappear automatically.You can repeat the procedure with a new channel number. Time/Date Manually If the time in the DVD Recorder display is not correct, the clock must be set manually. Time/date Manual Time AM/PM Year Month Date Daylight Saving 03: 46 PM 2001 06 16 On To exit press SYSTEM MENU 4 Press SYSTEM MENU to exit the Cable/Antenna menu. ➤ If you have selected 'Cable' or 'Anten.,' the Auto Channel Search starts. Only after a new channel search, the new setting will take effect. Installation Cable/Anenna To start auto channel search - press OK To exit press SYSTEM MENU 5 Press ENTER/OK to confirm. If you press SYSTEM MENU, you will return to the Installation menu. When Auto Channel Search is complete, press SYSTEM MENU repeatedly to remove all menus. 1 In the installation menu, select Time/Date with w/v (down/up cursor), then press u (right cursor). ➤ The Automatic/Manual screen is displayed, with the cursor on the currently selected option. 2 Press the w (down cursor) to select 'Manual.' 3 Press ENTER/OK. ➤ The Time/Date screen appears. 4 Adjust 'Time,' 'AM/PM,' 'Year,' 'Month,' 'Date,' and 'Day- light saving' if required. Select w/v (down/up cursor). Change values with t/u (left/right cursor) or the 0-9 digit buttons. 5 When the information is all correct, press ENTER/ OK. 6 Press SYSTEM MENU repeatedly to remove all menus. Cable/Antenna The Cable/Antenna option allows you to overrule the Auto Cable Defect feature in case misdetection took place. 1 In the Installation menu, select 'Cable/Antenna' with w/v (down/up cursor), then press ENTER/OK or u (right cursor). ➤ The Cable/Antenna' screen is displayed. 2 Select 'Cable' or 'Anten.' using t/u (left/right cursor). Factory setting is 'Auto.' 3 Press ENTER/OK to store the setting. OPERATION 23