Yamaha DRX-1 Owner's Manual - Page 53
Appendix
View all Yamaha DRX-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Appendix Using your DVD Recorder remote control with your TV Your DVD Recorder remote control has limited control of TVs of different brands. The following buttons will operate TVs: - VOL + increase TV volume - VOL - decrease TV volume - MUTE mute TV sound Other buttons normally operate the DVD Recorder but will operate the TV if you press and hold TV SHIFT. - CH + next higher TV channel - CH - next lower TV channel - 0 - 9 choose TV channel directly - POWER (B/I) switch TV to standby or power off or on If your TV does not respond to the Recorder's remote control, reprogram your remote control. Below are the remote control codes for various TV brands. Follow these steps to reprogram the remote control. 1 Look up the setup code for your TV in the code list in the following pages. 2 Pointing the remote control at the TV, press and hold t and u (left and right cursor) simultaneously for at least three seconds. 3 Release both buttons. 4 Within 30 seconds, enter the correct four digit code by using the digit buttons 0-9. 5 See if the remote works as described at left. If the remote does not work your TV, try other codes for your brand. If the brand of your TV is not in the list, try the codes for other brands one after the other or follow the alternative process as described below. APPENDIX 49 English