Yamaha DRX-1 Owner's Manual - Page 34

Playback Playing a DVD+RW/+R disc 1 Insert a DVD+RW or a DVD+R disc. ➤ If the inserted disc is erase-protected, playback starts automatically. Otherwise, the Index Picture Screen appears. 2 Press w/v (down/up cursor) to select the Title you want to play. ➤ If you do not select a Title, playback starts from the point where it stopped the last time the disc was played or recorded. ➤ If the disc is a new blank disc, the display will show 'EMPTY DISC.' 3 Press . 4 To stop playback at any time, press . ➤ The Index Picture Screen will appear. Playing a pre-recorded DVDVideo disc Notes: - DVD movies are released at different times in different regions of the world.All players have region codes, and discs can have an optional region code. If you load a disc that has a different region code than your Recorder, you will see the region code notice on the screen.The disc will not play and should be unloaded. -The region code of this Recorder is one (1).This is stated on a label on the back of your 1 Recorder. - Regional coding is not applicable for DVD+RW/+R discs. 2 The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numerical button; if not, use w/v/u/t (down/up/right/ left cursor) to highlight your selection, then press ENTER/OK. 3 To stop play at any time, press . ➤ The default screen will appear, giving information about the current status of the Recorder. Some DVD discs are produced in a way that requires specific operation or allows only limited operation during playback. In these cases the Recorder may not respond to all operating commands.When this occurs, please refer to the instructions in the disc jacket or case.When an appears in the top left corner of the TV screen, the operation is not permitted by the Recorder or the disc. 1 Insert a pre-recorded DVD-Video disc. Make sure the label is facing up. If the disc is two-sided, make sure the label of the side you want to play is facing down. ➤ When 'Auto resume' is 'On' (see 'User preferences') playback starts automatically from the point at which it stopped the last time the disc played. ➤ When 'Auto resume' is 'Off' the disc will play from the start of the disc.You can resume play from the point at which it stopped the last time by pressing shortly while appears in the top left corner of the TV screen.When pressing at beginning of disc playback an "X" may show on the screen. ➤ The currently playing title and chapter number will appear on the Recorder display.The elapsed playing time appears also. Note: During playback you can display and enter the DVD disc menu by pressing TOP MENU. Playing a (Super) Video CD 1 Insert a (Super) Video CD. ➤ When 'Auto resume' is 'On' (see 'User preferences'), playback starts automatically from the point at which it stopped the last time the disc played. ➤ The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numerical button. 2 To stop play at any time, press . ➤ The default screen will appear. 30 PLAYBACK