Yamaha DTXPRESS Owner's Manual - Page 21

● When the Record Mode is set to Replace ("Rpl"). The following display will appear while recording (only displayed, cannot be changed). The measure number currently being recorded. REC M= 18=Rp1†=1 Now Recording. When the end of the assigned measure number is reached, recording will automatically stop, and the display will return to the Drum Kit & Song display. * You can also stop recording by pressing the [START/S] button. ● When the Record Mode is set to Overwrite ("Ovr"). The following display will appear while recording (only displayed, cannot be changed). The measure number currently being recorded. REC M= 18=Ovr†=1 UNDO press ENT The song being recorded will continuously repeat until the [START/S] button is pressed. When the song reaches the end of the last measure, it will automatically start again from the beginning and new data will be added to the track's previous data. When the record mode is set to Overwrite ("Ovr"), press the [SAVE/ENT] button while recording to "undo" (do again) the record operation. The data previously recorded from the beginning of the song, up until the [SAVE/ENT] button was pressed, will revert to the data originally present. ● How the "Undo" Works (an example) Data recorded the first time. Data recorded the second time. Pressing the [SAVE/ENT] button here, only the data recorded the second time will be erased. Press the [START/S] button to stop recording, the display will return to the Drum Kit & Song display. If the power is cut off during recording, all user song data may be lost. Please use caution. 4. Listen to the Song Press the [START/S] button, playback of the song you just recorded will start from its beginning. You can also change the drum kit and playback the song with a different kit. m P. 48 [2. Program Change, Bank Select] Record Your Performance 5. Redo the Recording To record again, use the following procedure to clear previously recorded data in the track, then try recording again. • To clear song data (both tracks 1 and 2). Double-click the [SONG] button, the Clear Song display, shown below, will appear. SONG Clear Song Are you sure ? Press the [SAVE/ENT] button, all of the data in the currently selected song will be cleared. • To clear data from one track. Double-click the [SONG] button, after the Clear Song display, shown above, appears press the [PAGEs] button 2 times. The Clear Track display shown below will appear. SONG Clear Track Track=1 Use the [VALUE-]/[VALUE+] buttons to set the number of the track you want to clear, then press the [SAVE/ENT] button, "Are you sure ?" will appear in the display. Press the [SAVE/ENT] button again, all of the data in the currently assigned track of the selected song will be cleared. 6. Record One More Track In the same manner, one more track can be used to record. However, the number of measures cannot be changed. 7. Give the Song a Name On the display, "no name" will appear for the song name. Change the name to an original name. Press the [SONG] button to display the song mode, use the [PAGEs]/[PAGEt] buttons to select the Song Name setting display shown below. SONG SngName=no name Use the [SEL] buttons to move the flashing cursor to the character you want to change, then use the [VALUE-]/ [VALUE+] buttons to select the desired character. The available characters to choose from are listed below. (in order) Space 0123456789:;?@ ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_` abcdefghijklmnopqrstuvwxyz{|}ßå A maximum of 8 characters can be used for the song name. If the power is switched off, the completed song will be stored. 21