Yamaha DTXPRESS Owner's Manual - Page 60
Volume, Pan, Layer Balance, Tuning, 5. Decay, Cutoff Frequency, Reverb Send
View all Yamaha DTXPRESS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Utility Mode e Voice Number Voice Name [Range] 0, 1-127 Selects the assigned voice. Displays the voice number (1-127) and voice name. If this parameter is set to "0", "NoAssign" will appear in the display and sound will not be produced. * Refer to the [Drum Voice List] (P. 68). 5-2. Volume, Pan This function sets the volume w and pan e (the position in the stereo field) for each drum voice assigned to each MIDI note number q. UT MAP N= 0C -2 q Vol= 127 Pan= C w e q N (MIDI Note Number) Selects the MIDI note number (The same procedure as in [5-1. Voice]). w Vol (Volume) [Range] 0-127 e Pan [Range] L64 to C to R64. 5-3. Tuning This function sets the pitch for each drum voice assigned to each MIDI note number q. UT MAP N= 0C -2 q Tune C= 0 F= 0 w e q N (MIDI Note Number) Selects the MIDI note number (The same procedure as in [5-1. Voice]). w TuneC (Tune Coarse) [Range] -24 to 0 to +24 Tuning can be set in increments of a half step. e TuneF (Tune Fine) [Range] -64 to 0 to +63 Tuning can be set in increments of 1.17 cents. 5-4. Layer Balance When a drum voice assigned to a MIDI note number q is made up of 2 layers (a single voice consisting of 2 voice waves), this function sets the volume balance between those 2 layers. * When the selected voice only has a 1 layer, this setting will have no affect. UT MAP N= 0C -2 q LayerBalance=--- w q N (MIDI Note Number) Selects the MIDI note number (The same procedure as in [5-1. Voice]). w LayerBalance (Layer Balance) [Range] -64 to 0 to +63, --- Sets the volume balance between the 2 layers. * When the selected drum voice only has 1 layer, "---" will appear in the display and settings can not be carried out. 5-5. Decay, Cutoff Frequency This function sets the drum voice decay, the filter's cutoff frequency and adjusts the tone of each voice assigned to each MIDI note number q. UT MAP N= 0C -2 q Decay= 0 Fc= 0 w e q N (MIDI Note Number) Selects the MIDI note number (The same procedure as in [5-1. Voice]). w Decay [Range] -64 to 0 to +63. Negative values will produce a clearer sound. e Fc (Cutoff Frequency) [Range] -64 to 0 to +63 A positive value will produce a brighter sound, negative values will produce a rounder sound. 5-6. Reverb Send This sets the Reverb Send Level w for each drum voice assigned to each MIDI note number q. * The actual reverb send level will be determined by multiplying the Reverb Send Level set in [5-2. Drum Reverb Send] (P. 47) in the Drum Kit Voice Edit Mode. UT MAP N= 0C -2 q Reverb send= 127 w 60