Yamaha DVD-S2300MKII DVD-S2300MKII Manual - Page 14

PLAYING A DISC PLAYING A DISC Before starting playback Before playing a disc, you must connect the unit's audio and video output jacks to an AV amplifier or other system component (refer to pages 8 and 9). Note • If you digitally connect the unit to an amplifier that does not feature a DTS decoder, set DTS DIGITAL SURROUND to PCM (factory default) in the Setup/Audio menu. Otherwise, unprocessed digital signal noise will be output that may damage your hearing or speakers. Basic operation POWER DVD/SACD mode indicator 4 If necessary, press SACD/DVD to change the mode. For more information, refer to "Switching disc play mode" on page 10 (below). 5 Press w. The disc tray closes and playback starts. y • If one of the following indicators is displayed DVD-A DVD-V VCD refer to "Using disc menus" on page 13. • When the unit finishes playing a DVD, it stops playback or displays a menu screen. Note • The unit cannot play CD-R or CD-RW discs that have not been finalized. Be sure to finalize discs on a CD recorder before playing them in this unit. (The term "finalize" refers to an audio process for CD-Rs or CD-RWs that prepares them for play on supporting players.) ■ Switching disc play mode SACD/DVD OPEN/CLOSE While the unit is stopped or the disc tray is open, press SACD/DVD. The unit includes independent playback circuits for SACDs and DVDs to optimize use of each disc type. • To play an SACD, switch to SACD mode. • To play other types of discs, switch to DVD mode. Use SACD mode to play SACD . The SACD mode indicator lights up. Use DVD mode to play DVD-A , DVD-V , VCD , and CD The DVD mode indicator lights up. y • If you are playing a hybrid disc that contains both SACD for- mat data and conventional CD format data, select SACD mode to play the SACD format data, or DVD mode to play the CD format data. ■ To stop playback 1 Press POWER to turn on the power. 2 Press OPEN/CLOSE to open the disc tray. 3 Load a disc into the disc tray. Press a. ■ Resume function The unit retains memory of the point at which you pressed the a button as long as the power to the unit is turned on. During this time, the W indicator will flash on the display. Press w to resume playback from the stop point. 10