Yamaha DVD-S2300MKII DVD-S2300MKII Manual - Page 33

DETAILED SETTINGS Speaker settings DVD-A DVD-V Set the parameters for 6CH DISCRETE output to suit the speaker system. , , , / ENTER If you select "Multi-channel" from the Setup menu, set parameters a, b, and c (page 29 and page 30) according to the speaker system. Setting panel Main (L) a Exit Center b a c Main (R) a SETUP SELECT ENTER RETURN L ms C dB R 0 0 Exit Test dB SW 0 LS dB 0 ms 0 dB 0 RS Test signal Rear Subwoofer (L) a (L) c b (R) c (R) a c a CHANGING THE DVD MODE SETTINGS a Speaker selection and size 1 Press the cursor buttons (k, n, l, h) to select a speaker, then press ENTER. The indicator is displayed above and below the speaker icons. 2 Press the cursor buttons (k, n) to select a setting, then press ENTER. • Speaker size options: L: Large, Small R: Large, Small C: Large, Small, None SW: Used, Not used LS: Large, Small, None RS: Large, Small, None The left (L or LS) speaker size is automatically assigned to the right (R or RS) speaker. (For example, if you select Large for the L speaker, the R speaker will automatically be set to Large.) • Example: Left rear speaker 1 2 3 LS LS 1 No icon appears when the speaker is not used. 2 This icon appears when using a large speaker capable of low-frequency (under 100 Hz) output. 3 This icon appears when using a small speaker that is not capable of low-frequency output. • Factory default speaker-size settings: L/R: Large C/LS/RS: Large SW: Used English 29