Yamaha RX-V371 Owners Manual - Page 39

■ Adjusting volume between input sources Volume Trim Input source: All Reduces any change in volume when switching between input sources by correcting volume differences in each input source. You can adjust this parameter for each input source. Adjustable range -6.0 dB to 0.0 dB to +6.0 dB Default setting 0.0 dB Adjustment increments 0.5 dB steps ■ Combining HDMI/AV1-2 input source video and audio Audio In Input source: HDMI1-4, AV1-2 Combines video from HDMI or AV input sources with analog/ digital audio inputs in situations such as: - an external device is connected with an HDMI cable but cannot transmit audio through HDMI - an external device with component video output and analog audio output (such as certain game consoles) are connected to the system Inputs that change the audio source HDMI1 VOL. SW Audio;;;;;;AV1 L CR SL SR Assignable audio input jacks To change assignments, select an input source (HDMI1-4 or AV1-2) as the video input first, and then select audio input jacks in this menu. J 1 : AV5 or AUDIO1-2 are also available when the "Audio Return Channel" function is on, and the source is used for the TV audio input (TVAudio). SETUP Configuring the settings specific for each input source (Option menu) Set as follows according on the desired combination of audio input jacks. Audio inputs Settings method Optical digital audio Select AV1 or AV4. Connect the external component input audio cable to the optical jack for the selected input. Coaxial digital audio Select AV2 or AV3. Connect the external component input audio cable to the coaxial jack for the selected input. Analog audio input Select one of AV5, AUDIO1, or AUDIO2. Connect the external component audio cable to the audio jack for the selected input. • For details of settings, refer to "Receiving audio from other input sources" (☞p. 16) and "Component connections to analog audio output devices" (☞p. 17). • To return audio inputs to their previous settings, display this item again, and select the original input jack. ■ Displaying information on audio/video signals Signal Info Input source: HDMI1-4, AV1-4 J1 Displays information on digital audio and video signals on the front panel display. You can display the signal information by pressing jENTER on the menu item and using jCursor B / C. Menu item Audio information FORMAT CHAN SAMPL B RATE Format of audio signals. The number of input signal channels (front/surround/ LFE). For example, if input signal channels are 3 front channels, 2 surrounds and LFE, "3/2/0.1" is displayed. If a channel that cannot be expressed as the above is input, a total number of channels such as "5.1ch" may be displayed. The sampling frequency of analog-to-digital conversion. The bit rate of input signal per second. Video information V IN V OUT V.MSG (appears only when an error has occurred) Format and resolution of video input signal. Format and resolution of video output signal. Error messages about HDMI signals and components. Error message HDCP Error HDCP authentication failed. Device Over The number of connected HDMI components is over the limit. • "No Signal" is displayed when no signals are being received, and "---" is displayed if this unit cannot recognize the incoming signal. • The bit rate may vary during playback. FORMAT Dolby VOL. D SW L CR SL SR Information En 39