Yamaha RX-V371 Owners Manual - Page 51

■ Parameters usable in certain sound field programs 2ch Stereo only Direct Automatically bypasses the DSP circuit and tone control circuit depending on the condition of tone control etc., when an analog sound source is played back. You can enjoy a higher quality sound. Auto (Default) Off Outputs sound by bypassing the DSP circuit and tone control circuit when both tone controls of "Bass" and "Treble" are set to 0dB. Does not bypass the DSP circuit and tone control circuit. 5ch Stereo only CT Level Adjusts the center channel volume. J1 Adjustable range 0 to 100% Default setting 100% SL Level Adjusts the volume of the surround L channel. J1 Adjustable range 0 to 100% Default setting 100% Straight Enhancer/5ch Enhancer only EFCT LVL Adjusts the effect level of the compressed music enhancer mode. High (Default) Low Standard effect. Sets when the high-frequency signals of the source are emphasized excessively. ■ Parameters usable in surround decoder q PLII Music only Panorama Adjusts the soundscape of the front sound field. Sends front left/ right channels sounds to the surround speakers as well as the front speakers for a wraparound effect. Off (Default) On Disables the effect. Enables the effect. CT Width Spreads the center channel sound to the front left and right speakers to suit your needs or preferences. Set this parameter to 0 for outputting the center sound from the center speaker only, or to 7 for outputting it from the front left/right speaker only. Adjustable range 0 to 7 Default setting 3 SETUP Setting sound field program parameters Dimension Adjusts the difference in level between the front sound field and the surround sound field. You can adjust the difference in level created by the software being played back to obtain the preferred sound balance. The surround sound gets stronger as you make the value more negative, and the front sound gets stronger as you make the value more positive. Adjustable range -3 to +3 Default setting 0 When Neo:6 Music is selected C.Image Adjusts the front left and right channel output relative to the center channel to make the center channel more or less dominant as necessary. Adjustable range 0.0 to 1.0 Default setting 0.3 SR Level Adjusts the volume of the surround R channel. J1 Adjustable range 0 to 100% Default setting 100% J 1 : Not displayed when speakers are set to be inactive. En 51