Yamaha RX-V371 Owners Manual - Page 49

■ Goes enter standby mode automatically when you leave it without operating AutoPowerDown If you do not operate this unit or use the remote control for an extended period of time, it will automatically go into standby mode (Auto Power Down function). This function's default setting is "Off." When you wish to activate this function, set the amount of time to pass before this unit will enter standby. Off (Default) 4hours 8hours 12hours Auto Power Down function is disabled. Goes into standby mode, when you have not operated this unit for four hours. Goes into standby mode, when you have not operated this unit for eight hours. Goes into standby mode, when you have not operated this unit for twelve hours. This unit starts a countdown of 30 seconds before entering the standby mode. Pressing any key of the remote control during the countdown cancels entering the standby mode and reset the timer. ■ Setting the brightness of the front panel display Dimmer Sets the brightness of the front panel display. Lowering the setting dims the display. Adjustable range -4 to 0 Default setting 0 Setting sound field program parameters You can set the parameters for the sound field programs (☞p. 50). SETUP VOL. SW DSP Parameter L CR SL SR Prohibiting setting changes SETUP VOL. Memory Guard SW L CR SL SR Prohibits setting changes to prevent careless changes being made to the settings on Setup menu. Off (Default) On Settings are not protected. Prohibits changes to the settings on Setup menu until it is returned to "Off." While set to "On," the unit displays "Memory Guard!" when an attempt is made to change the settings. SETUP Setting various functions (Setup menu) En 49