Yamaha StageMix User's Guide - Page 16

Screen areas 4 Meter display Display the post-fader channel level. Two meters are displayed for AUX 9/10-19/20, STEREO, and MONITOR channels. Meters are not displayed for DCA channels. 5 CUE button Turns the channel's cue on and off. This button lights up when the cue is turned on. The CUE button is not displayed for the MONITOR channel. CH Name area Allows you to adjust the channel's pan/balance, and displays the channel's number, name, icon, and color. ձ ղ 1 Pan/balance slider Drag left and right to adjust the pan or balance of the channel. The control stops at the center position; you can then continue to drag it left or right as desired. When the pan or balance is set to the center position, a round icon is displayed. You can also double-tap this area to set the pan or balance to the center position. You can adjust pan/balance for multiple channels at the same time. 2 Channel display Displays the channel number, name, icon, and color. Overview strip area The STEREO channel strip is normally displayed in the overview strip area. When using SENDS ON FADER mode, the destination AUX channel or SUB channel strip is displayed here. You can switch to SENDS ON FADER mode by tapping a channel number displayed on the left side of the strip. The selected channel will be highlighted in the channel's color. Tap off near the bottom of the strip to exit SENDS ON FADER mode. If you enter SENDS ON FADER mode while an FX channel is selected, nothing is displayed here. - 16 - TF StageMix User's Guide