Yamaha StageMix User's Guide - Page 17
SENDS ON FADER screen, Send pan slider, Send ON button, Send level fader, Fader, PRE button
View all Yamaha StageMix manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
SENDS ON FADER screen Allows you to use the faders to adjust the send level for each channel. Screen areas In SENDS ON FADER mode, the details area changes to display SENDS ON FADER information. Note, however, that the display does not change for channels that have no send destination. ձ ղ ճ մ յ ն 1 Send pan slider Displayed for stereo AUX buses. Allows you to adjust the pan of the signal sent to the AUX bus. 2 Send ON button Determines whether a signal is sent (on) or not sent (off) to the corresponding AUX bus. This button lights when the send is turned on. 3 Send level fader Allows you to adjust the send level of the corresponding channel. You can tap the value and then increase and decrease it by tapping the up and down arrows. 4 Fader Determines the amount of signal sent to the corresponding AUX bus. 5 PRE button Allows you to select whether the pre-fader or post-fader signal is sent to the corresponding AUX bus. This button lights when it is turned on. On: Before the fader Off: After the fader 6 CH NAME display Displays the channel's number, name, icon, and color. - 17 - TF StageMix User's Guide