Yamaha StageMix User's Guide - Page 24
COMP screen, Out Gain slider
View all Yamaha StageMix manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
COMP screen Displayed when you tap the COMP button in the TOOLBAR area. Allows you to configure the compressor for each channel. ձ ղ ոճ չ Screen areas մ ռ ս յ ն շ ջպ 1 COMP button Turns the compressor on and off. 2 1-knob button Switches between 1-knob mode and manual mode. 3 1-knob level slider (1-knob mode only) Adjusts the amount of 1-knob compressor applied. Not displayed during manual mode. 4 Compressor input level slider Displays the compressor's input level. 5 Threshold slider Determines the level at which the compressor is applied. 6 Compressor graph Displays a visual representation of the current settings. 7 Ratio slider Determines the amount of compression that is applied. 8 Attack slider When the input signal exceeds the threshold, this setting determines how quickly the maximum amount of compressor is applied. 9 Release slider When the input signal drops below the threshold, this setting determines how much time passes before the compressor is no longer applied. The value here is expressed as the time required for the level to change by 6dB. 0 Out Gain slider Adjusts the output level of the compressor. A Knee button Determines the how gradual or sudden the curve is at the threshold. A soft knee means that compression is applied gradually as the signal exceeds the threshold; a hard knee means a more sudden transition. B GR (gain reduction) meter Displays the amount by which the signal's gain is reduced. - 24 - TF StageMix User's Guide