Yamaha YPP-200 Owner's Manual - Page 29

The Function Mode F3.5: 1st Voice Effect Depsth ...F3.6: 2nd Voice Effect Depth ...These functions make it possible to individually set the depth of the effect for the 1st and 2nd dual-mode Voices ("1st" and "2nd" is explained on page 17). Use the [-/NO] and [+/YES] buttons to set the effect depth for the corresponding voice as required. The depth range is from 0 through 20. A setting of "0" produces no effect, while a setting of "20" produces maximum effect depth. Press the [-/NO] and [+/YES] buttons simultaneously to recall the default setting (different for each voice combination). • The effect depth settings cannot be changed unless the EFFECT is ON. The Function mode must be exited before EFFECT can be turned ON. F3.7: Reset ...This function resets all dual-mode functions to their default values. Press the [+/YES] button to reset the values. "End" will appear on the display when all functions have been reset. F4 Soft Pedal Mode This function sets the footswitch connected to the SOFT jack for normal soft pedal operation or for song start/stop operation. Use the [-/NO] or [+/YES] buttons to select the desired soft pedal mode. "1" engages the normal soft pedal mode, and "2" engages the start/stop mode. When the start/stop mode is engaged, the footswitch connected to the SOFT jack functions in the same way as the SONG [START/STOP] button on the panel. Press the [-/NO] and [+/YES] buttons simultaneously to recall the default setting of "1". F5 Metronome Volume I SHORTCUT: You can jump directly to the metronome functions by pressing the [FUNCTION] button while holding the METRONOME [START/STOP] button. The volume of the metronome sound can be changed. After selecting "F5", use the [-/NO] and [+/YES] buttons to set the metronome volume as required. The volume range is from 1 through 20. A setting of "1" produces minimum sound, while a setting of "20" produces maximum metronome volume. Press the [-/NO] and [+/YES] buttons simultaneously to recall the default setting "10". F6 Preset Song Part Cancel Volume This function sets the volume at which a "canceled" part is played during preset song playback (see page 16 for information on the "part-cancel" function). Use the [-/NO] and [+/YES] buttons to set the volume as required. The volume range is from 0 through 20. A setting of "0" produces no sound, while a setting of "20" produces maximum volume. Press the [-/NO] and [+/YES] buttons simultaneously to recall the default setting "5". Adjust the part volume to a comfortable level to use the "canceled" part as a guide to play along with. Set to "0" if you don't want to hear the part. YPP-200 29