Yamaha YPP-200 Owner's Manual - Page 48
Put the keyboard on the stand., Post-assembly checklist, on the angle brackets.
View all Yamaha YPP-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4 V Put the keyboard on the stand. Carefully place the keyboard on the side boards. Slowly move the keyboard so that the holes on the bottom of the keyboard are properly aligned with the holes on the angle brackets. CAUTION • Be careful not to drop the keyboard or to get your fingers caught between the keyboard and the stand parts. 5 B Install the keyboard to the stand. Fix the keyboard to the angle brackets, using the 5 x 16 mm round head screws 5. I Post-assembly checklist Once you've assembled the stand, check the following points: • Are there any parts left over? ➔ If so, sread the assembly instructions again and correct any errors you might have made. • Is the instrument clear of doors and other movable fixtures? ➔ If not, move the instrument to an appropriate location. • Does the instrument make a rattling noise when you play it or move it? ➔ If so, properly tighten all screws. • Also, if the keyboard makes a creaking noise or seems unsteady when you play it, refer carefully to the assembly instructions and diagrams and retighten all screws. 5 5 x 16 mm round head screws 48 YPP-200