Yamaha YPP-200 Owner's Manual - Page 42

MIDI Data Format 4. PROGRAM CHANGE Data format: [CnH] -> [ppH] CnH = Program event (n = channel number) ppH = Program change number P.C.#=Program Change number MSB LSB P.C.# PIANO 1 0 112 0 PIANO 2 0 112 1 E.PIANO 0 112 4 HARPSICHORD 0 112 6 VIBRAPHONE 0 112 11 CHURCH ORGAN 0 112 19 STRINGS 0 112 48 CHOIR 0 112 52 • When program change reception is turned OFF in the Function mode, no program change data is transmitted or received. Also, Bank MSB/LSB is not transmitted or received. 5. SYSTEM REALTIME MESSAGES [rrH] F8H: Timing clock FAH: Start FCH: Stop FEH: Active sensing Data F8H FAH FCH FEH Transmission Transmitted every 96 clocks Recorder start Recorder stop Transmitted every 200 milliseconds Reception Received as 96-clock tempo timing when MIDI clock is set to External Recorder start Not received when the MIDI clock is set to Internal. Recorder stop Not received when the MIDI clock is set to Internal. If a signal is not received via MIDI for more than 400 milliseconds, the same processing will take place for All Sound Off, All Notes Off and Reset All Controllers as when those signals are received. • Caution: If an error occurs during MIDI reception, the Damper, Sostenuto, and Soft effects for all channels are turned off and an All Note Off occurs. 6. SYSTEM EXCLUSIVE MESSAGES (Yamaha MIDI Format) Panel Data Transmit Data format: [F0H] -> [43H] -> [0nH] -> [7CH F7H] F0H, 43H, 0nH, 7CH (n: channel number) 00H, 2AH (data length) 43H, 4CH, 20H, 20H (CL) 59H, 50H, 50H, 27H, 30H, 31H (YPP '01) 30H, 30H (version x, y) [PANEL DATA] [CHECK SUM (1byte)] = 0-(43H+4CH+20H+......+Data end) F7H • Panel Data Contents (1) 1'st Voice (2) Dual On/Off (3) Dual Voice (4) Dual Balance (5) Dual Detune (6) Dual Voice1 Octave (7) Dual Voice2 Octave (8) Dual Voice1 Effect Depth (9) Dual Voice2 Effect Depth (10) - (11) - (12) - (13) - (14) - (15) - (16) - (17) - (18) - (19) Reverb Type 1 (20) Reverb Type 2 (21) Reverb Depth1 (22) Reverb Depth2 (23) Effect Type 1 (24) Effect Type 2 (25) Effect Depth (26) Touch Sensitivity (27) Fixed Data (28) Soft Pedal Function (29) Absolute tempo low byte (30) Absolute tempo high byte • "-" indicates no affect. • Panel data send requests cannot be received. 7. SYSTEM EXCLUSIVE MESSAGES (Universal System Exclusive) (1) Universal Realtime Message Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] -> [ll H] -> [mmH] -> [F7H] MIDI Master Volume • Simultaneously changes the volume of all channels. • When a MIDI master volume message is received, the volume only has affect on the MIDI receive channel, not the panel master volume. F0H = Exclusive status 7FH = Universal Realtime 7FH = ID of target device 04H = Sub-ID #1=Device Control Message 01H = Sub-ID #2=Master Volume ll H = Volume LSB mmH = Volume MSB F7H = End of Exclusive or F0H = Exclusive status 7FH = Universal Realtime XnH = When n is received n=0~F, whichever is received. X = don't care 04H = Sub-ID #1=Device Control Message 01H = Sub-ID #2=Master Volume ll H = Volume LSB mmH = Volume MSB F7H = End of Exclusive 42 YPP-200