Yamaha YPP-200 Owner's Manual - Page 36

Using the MIDI Functions Connecting to a Personal Computer By connecting your YPP-200's MIDI terminals to a personal computer, you can have access to a wide variety of music software. When using a MIDI interface device installed in the personal computer, connect the MIDI terminals of the personal computer and the YPP-200. Use only special MIDI cables when connecting MIDI devices. G Connect the MIDI terminals of the YPP-200 to the MIDI terminals of the personal computer. MIDI OUT MIDI IN MIDI IN Computer (sequencer software) MIDI OUT YPP-200 • When connecting the YPP-200 to a personal computer, first turn the power to both the YPP-200 and the computer OFF before connecting the cable. After connecting the cable, turn the power to the computer on first, then turn on the YPP-200. G When using a MIDI interface with a Macintosh series computer, connect the RS-422 terminal of the computer (modem or printer terminal) to the MIDI interface, as shown in the diagram below. RS-422 MIDI Interface MIDI IN Computer (sequencer software) MIDI OUT YPP-200 • When using a Macintosh series computer, set the MIDI interface clock setting in the application software to match the setting of the MIDI interface you are using. For details, refer to the owner's manual for the software you are using. G When connecting to a computer with a USB interface, use the Yamaha UX256 USB/MIDI Interface. Connect the UX256 and the computer with a standard USB cable, then make the proper MIDI connections between the YPP-200 and the UX256. UX 256 MIDI IN USB Cable Computer (sequencer software) MIDI OUT USB Cable YPP-200 36 YPP-200