ZyXEL G-302 v3 User Guide - Page 50

ZyXEL G-302 v3 User's Guide The following table describes the labels in this screen. Table 12 Profile: Wireless Setting: Select a Channel LABEL Wireless Setting Ad-Hoc Channel Back Next Exit DESCRIPTION Select a channel number from the drop-down list box. To associate to an ad-hoc network, you must use the same channel as the peer computer. Click Back to return to the Add New Profile screen. Click Next to confirm your selection and advance to the Encryption Type screen. Click Exit to discard changes and return to the Add New Profile screen. 3 If you select Infrastructure network type in the first screen, select WEP, WPA, WPA2, WPA-PSK or WPA2-PSK from the drop-down list box to enable data encryption. If you select Ad-Hoc network type in the first screen, you can only use WEP encryption method. Otherwise, select DISABLE to allow the G-302 v3 to communicate with the access points or other peer wireless computers without any data encryption and skip to step 6. Figure 22 Profile: Security Setting: Encryption Type 4 The screen varies depending on the encryption method you select in the previous screen. The settings must be exactly the same on the APs or other peer wireless computers as they are on the G-302 v3. Refer to Section 3.2.2 on page 38 for detailed information on wireless security configuration. 46 Chapter 3 ZyXEL Utility Configuration