Home » ZyXEL Manuals » Wireless » ZyXEL WAC6303D-S » Manual Viewer

ZyXEL WAC6303D-S User Guide - Page 109

Rogue AP, Rogue AP Detection, Configuration > Wireless > Rogue AP, LABEL, DESCRIPTION

Add to My Manuals
Save this manual to your list of manuals

Page 109 highlights

Chapter 10 Wireless Table 42 Configuration > Wireless > AP Management (continued) LABEL DESCRIPTION Radio 2 OP Mode This displays if the Zyxel Device has a second radio. Select the operating mode for radio 2. AP Mode means the radio can receive connections from wireless clients and pass their data traffic through to the Zyxel Device to be managed (or subsequently passed on to an upstream gateway for managing). MON Mode means the radio monitors the broadcast area for other APs, then passes their information on to the Zyxel Device where it can be determined if those APs are friendly or rogue. If a radio is set to this mode it cannot receive connections from wireless clients (see Section 1.2.3 on page 15). Root AP means the radio acts as an AP and also supports the wireless connections with other APs (in repeater mode) to form a WDS to extend its wireless network. Radio 2 Profile Repeater means the radio can establish a wireless connection with other APs (in either root AP or repeater mode) to form a WDS. This displays if the Zyxel Device has a second radio. Select the radio profile the radio uses. Radio 2 WDS Profile Uplink Selection Mode Max Output Power Note: You can only apply a 5G AP radio profile to radio 2. Otherwise, the second radio will not be working. This field is available only when the radio is in Root AP or Repeater mode. Select the WDS profile the radio uses to connect to a root AP or repeater. This field is available only when the radio is in Repeater mode. Select AUTO to have the Zyxel Device automatically use the settings in the applied WDS profile to connect to a root AP or repeater. Select Manual to have the Zyxel Device connect to the root AP or repeater with tbe MAC address specified in the Radio 2 Uplink MAC Address field. Enter the maximum output power (between 0 to 30 dBm) of the Zyxel Device in this field. If there is a high density of APs in an area, decrease the output power of the Zyxel Device to reduce interference with other APs. MBSSID Settings Edit # SSID Profile Apply Reset Note: Reducing the output power also reduces the Zyxel Device's effective broadcast radius. Double-click an entry or select it and click Edit to open a screen where you can modify the entry's settings. In some tables you can just click a table entry and edit it directly in the table. For those types of tables small red triangles display for table entries with changes that you have not yet applied. This field shows the index number of the SSID This field shows the SSID profile that is associated with the radio profile. Click Apply to save your changes back to the Zyxel Device. Click Reset to return the screen to its last-saved settings. 10.3 Rogue AP Use this screen to enable Rogue AP Detection and import/export a rogue or friendly AP list in a txt file. Click Configuration > Wireless > Rogue AP to access this screen. NWA/WAC/WAX Series User's Guide 109

Section	Page
NWA/WAC/WAX Series	1
Document Conventions	3
Contents Overview	4
Table of Contents	5
Introduction	13
1.1 Overview	13
1.2 Zyxel Device Roles	13
1.2.1 Root AP	14
1.2.2 Wireless Repeater	14
1.2.3 Radio Frequency (RF) Monitor	15
1.3 Sample Feature Applications	17
1.3.1 MBSSID	17
1.3.2 Dual-Radio	18
1.4 Zyxel Device Product Feature Comparison	19
AP Management	24
2.1 Management Mode	24
2.1.1 Standalone	24
2.1.2 Nebula Control Center	24
2.1.3 AP Controller (AC)	26
2.2 Switching Management Modes	26
2.3 Zyxel One Network (ZON) Utility	27
2.3.1 Requirements	27
2.3.2 Run the ZON Utility	28
2.4 Ways to Access the Zyxel Device	31
2.5 Good Habits for Managing the Zyxel Device	32
Hardware	33
3.1 Grounding (WAC6552D-S and WAC6553D-E)	33
3.2 Zyxel Device Models With Single LEDs	34
3.2.1 NWA1123-ACv2	34
3.2.2 WAC6303D-S and NWA5123-AC HD	36
3.2.3 NWA1123-AC HD	37
3.2.4 NWA5123-AC	39
3.2.5 NWA110AX, WAX510D and WAX650S	40
3.3 Zyxel Device Models With Multiple LEDs	42
3.3.1 NWA1123-AC PRO	42
3.3.2 NWA1302-AC	44
3.3.3 WAC6502D-E, WAC6502D-S, and WAC6503D-S	46
3.3.4 WAC6103D-I	48
3.3.5 WAC5302D-S	50
Web Configurator	53
4.1 Overview	53
4.2 Accessing the Web Configurator	53
4.3 Navigating the Web Configurator	55
4.3.1 Title Bar	56
4.3.2 Navigation Panel	58
4.3.3 Standalone Mode Navigation Panel Menus	58
4.3.4 Cloud Mode Navigation Panel Menus	60
4.3.5 Tables and Lists	61
Standalone Configuration	64
Standalone Configuration	65
5.1 Overview	65
5.2 Starting and Stopping the Zyxel Device	65
Dashboard	67
6.1 Overview	67
6.1.1 CPU Usage	70
6.1.2 Memory Usage	71
Setup Wizard	73
7.1 Accessing the Wizard	73
7.2 Using the Wizard	73
7.2.1 Step 1 Time Settings	73
7.2.2 Step 2 Password and Uplink Connection	74
7.2.3 Step 3 Radio	75
7.2.4 Step 4 SSID	76
7.2.5 Summary	78
Monitor	79
8.1 Overview	79
8.1.1 What You Can Do in this Chapter	79
8.2 What You Need to Know	79
8.3 Network Status	80
8.3.1 Port Statistics Graph	81
8.4 Radio List	82
8.4.1 AP Mode Radio Information	84
8.5 Station List	86
8.6 WDS Link Info	87
8.7 Detected Device	88
8.8 View Log	91
Network	94
9.1 Overview	94
9.1.1 AP Controller Management	94
9.1.2 What You Can Do in this Chapter	96
9.2 IP Setting	97
9.3 VLAN	98
9.4 Storm Control	101
9.5 AC (AP Controller) Discovery	102
9.6 NCC Discovery	103
Wireless	105
10.1 Overview	105
10.1.1 What You Can Do in this Chapter	105
10.1.2 What You Need to Know	106
10.2 AP Management	106
10.3 Rogue AP	109
10.3.1 Add/Edit Rogue/Friendly List	113
10.4 Load Balancing	114
10.4.1 Disassociating and Delaying Connections	115
10.5 DCS	116
10.6 Technical Reference	117
Bluetooth	119
11.1 Overview	119
11.1.1 What You Need To Know	119
11.2 Bluetooth Advertising Settings	120
11.2.1 Edit Advertising Settings	120
User	122
12.1 Overview	122
12.1.1 What You Can Do in this Chapter	122
12.1.2 What You Need To Know	122
12.2 User Summary	123
12.2.1 Add/Edit User	123
12.3 Setting	125
12.3.1 Edit User Authentication Timeout Settings	127
AP Profile	129
13.1 Overview	129
13.1.1 What You Can Do in this Chapter	129
13.1.2 What You Need To Know	129
13.2 Radio	130
13.2.1 Add/Edit Radio Profile	131
13.3 SSID	136
13.3.1 SSID List	136
13.3.2 Add/Edit SSID Profile	138
13.4 Security List	140
13.4.1 Add/Edit Security Profile	141
13.5 MAC Filter List	145
13.5.1 Add/Edit MAC Filter Profile	145
13.6 Layer-2 Isolation List	146
13.6.1 Add/Edit Layer-2 Isolation Profile	148
MON Profile	149
14.1 Overview	149
14.1.1 What You Can Do in this Chapter	149
14.2 MON Profile	149
14.2.1 Add/Edit MON Profile	150
WDS Profile	152
15.1 Overview	152
15.1.1 What You Can Do in this Chapter	152
15.2 WDS Profile	152
15.2.1 Add/Edit WDS Profile	153
Certificates	154
16.1 Overview	154
16.1.1 What You Can Do in this Chapter	154
16.1.2 What You Need to Know	154
16.1.3 Verifying a Certificate	156
16.2 My Certificates	157
16.2.1 Add My Certificates	158
16.2.2 Edit My Certificates	160
16.2.3 Import Certificates	163
16.3 Trusted Certificates	164
16.3.1 Edit Trusted Certificates	165
16.3.2 Import Trusted Certificates	168
16.4 Technical Reference	169
System	170
17.1 Overview	170
17.1.1 What You Can Do in this Chapter	170
17.2 Host Name	170
17.3 Power Mode	171
17.4 Date and Time	172
17.4.1 Pre-defined NTP Time Servers List	174
17.4.2 Time Server Synchronization	174
17.5 WWW Overview	175
17.5.1 Service Access Limitations	175
17.5.2 System Timeout	175
17.5.3 HTTPS	176
17.5.4 Configuring WWW Service Control	176
17.5.5 HTTPS Example	177
17.6 SSH	183
17.6.1 How SSH Works	184
17.6.2 SSH Implementation on the Zyxel Device	185
17.6.3 Requirements for Using SSH	185
17.6.4 Configuring SSH	185
17.6.5 Examples of Secure Telnet Using SSH	186
17.7 Telnet	187
17.8 FTP	188
17.9 SNMP	189
17.9.1 Supported MIBs	190
17.9.2 SNMP Traps	190
17.9.3 Configuring SNMP	190
17.9.4 Adding or Editing an SNMPv3 User Profile	191
Log and Report	193
18.1 Overview	193
18.1.1 What You Can Do In this Chapter	193
18.2 Email Daily Report	193
18.3 Log Setting	195
18.3.1 Log Setting Screen	196
18.3.2 Edit System Log Settings	197
18.3.3 Edit Remote Server	201
18.3.4 Active Log Summary	202
File Manager	205
19.1 Overview	205
19.1.1 What You Can Do in this Chapter	205
19.1.2 What you Need to Know	205
19.2 Configuration File	206
19.2.1 Example of Configuration File Download Using FTP	210
19.3 Firmware Package	211
19.3.1 Example of Firmware Upload Using FTP	212
19.4 Shell Script	213
Diagnostics	216
20.1 Overview	216
20.1.1 What You Can Do in this Chapter	216
20.2 Diagnostics	216
LEDs	218
21.1 Overview	218
21.1.1 What You Can Do in this Chapter	218
21.2 Suppression Screen	218
21.3 Locator Screen	219
Antenna Switch	221
22.1 Overview	221
22.1.1 What You Need To Know	221
22.2 Antenna Switch Screen	221
Reboot	223
23.1 Overview	223
23.1.1 What You Need To Know	223
23.2 Reboot	223
Shutdown	224
24.1 Overview	224
24.1.1 What You Need To Know	224
24.2 Shutdown	224
Local Configuration in Cloud Mode	225
Cloud Mode	226
25.1 Overview	226
25.2 Cloud Mode Web Configurator Screens	226
Dashboard	228
Network	230
27.1 Overview	230
27.1.1 What You Can Do in this Chapter	230
27.2 IP Setting	230
27.3 VLAN	232
Maintenance	233
28.1 Overview	233
28.1.1 What You Can Do in this Chapter	233
28.2 Shell Script	233
28.3 Diagnostics	234
28.4 View Log	235
Appendices and Troubleshooting	238
Troubleshooting	239
29.1 Overview	239
29.2 Power, Hardware Connections, and LED	239
29.3 Zyxel Device Management, Access, and Login	240
29.4 Internet Access	244
29.5 WiFi Network	245
29.6 Resetting the Zyxel Device	246
29.7 Getting More Troubleshooting Help	247
Importing Certificates	248
IPv6	272
Customer Support	280
Legal Information	286

Match case Limit results 1 per page

Chapter 10 Wireless

NWA/WAC/WAX Series User’s Guide

109

10.3

Rogue AP

Use this screen to enable

Rogue AP Detection

and import/export a rogue or friendly AP list in a txt file.

Click

Configuration > Wireless > Rogue AP

to access this screen.

Radio 2 OP Mode

This displays if the Zyxel Device has a second radio. Select the operating mode for radio 2.

AP Mode

means the radio can receive connections from wireless clients and pass their data

traffic through to the Zyxel Device to be managed (or subsequently passed on to an

upstream gateway for managing).

MON Mode

means the radio monitors the broadcast area for other APs, then passes their

information on to the Zyxel Device where it can be determined if those APs are friendly or

rogue. If a radio is set to this mode it cannot receive connections from wireless clients (see

Section 1.2.3 on page 15

Root AP

means the radio acts as an AP and also supports the wireless connections with

other APs (in repeater mode) to form a WDS to extend its wireless network.

Repeater

means the radio can establish a wireless connection with other APs (in either root

AP or repeater mode) to form a WDS.

Radio 2 Profile

This displays if the Zyxel Device has a second radio. Select the radio profile the radio uses.

Note: You can only apply a 5G AP radio profile to radio 2. Otherwise, the second

radio will not be working.

Radio 2 WDS Profile

This field is available only when the radio is in

Root AP

Repeater

mode.

Select the WDS profile the radio uses to connect to a root AP or repeater.

Uplink Selection

Mode

This field is available only when the radio is in

Repeater

mode.

Select

AUTO

to have the Zyxel Device automatically use the settings in the applied WDS

profile to connect to a root AP or repeater.

Select

Manual

to have the Zyxel Device connect to the root AP or repeater with tbe MAC

address specified in the

Radio 2 Uplink MAC Address

field.

Max Output Power

Enter the maximum output power (between 0 to 30 dBm) of the Zyxel Device in this field. If

there is a high density of APs in an area, decrease the output power of the Zyxel Device to

reduce interference with other APs.

Note: Reducing the output power also reduces the Zyxel Device’s effective

broadcast radius.

MBSSID Settings

Edit

Double-click an entry or select it and click

Edit

to open a screen where you can modify the

entry’s settings. In some tables you can just click a table entry and edit it directly in the

table. For those types of tables small red triangles display for table entries with changes that

you have not yet applied.

This field shows the index number of the SSID

SSID Profile

This field shows the SSID profile that is associated with the radio profile.

Apply

Click

Apply

to save your changes back to the Zyxel Device.

Reset

Click

Reset

to return the screen to its last-saved settings.

Table 42

Configuration > Wireless > AP Management (continued)

LABEL

DESCRIPTION