2008 Acura RDX Owner's Manual - Page 180

Main Menu Table Of Contents Audio System Loading CDs in the Changer To load multiple discs in one operation: 1. Press and hold the LOAD button on the changer unit until you hear a beep. You will see ''BUSY'' on the center display, and disc load indicator turns red and starts blinking. 2. Insert the disc into the disc slot when the disc load indicator turns green and ''LOAD'' appears on the center display at the same time. Insert it only halfway; the drive will pull it in the rest of the way. You will see ''BUSY'' on the center display, and the disc load indicator turns red again and blinks as the CD is loaded. 3. When the disc load indicator turns green and ''LOAD'' appears on the center display again, insert the next CD in the slot. Do not try to insert a disc until ''LOAD'' appears. You could damage the audio unit. 4. Repeat steps 1 through 3 until all six positions are loaded. If you are not loading all six positions, press the LOAD button again after the last CD has loaded. ''DISC READ'' appears on the center display, then the system begins playing the last CD loaded. If you stop loading discs before all six positions are filled, the system will wait for 10 seconds, stop the load operation, and begin playing the last disc loaded. To load a single disc: 1. Press and release the LOAD button on the changer unit. You will see ''BUSY'' on the center display, and the disc load indicator turns red and starts blinking. 2. Insert a disc into the disc slot when the disc load indicator turns green and ''LOAD'' appears on the center display at the same time. Insert the disc only about halfway; the drive will pull it in the rest of the way. You will see the disc indicator blinking on the center display. Do not try to insert a disc until ''LOAD'' appears. You could damage the audio unit. 176 2008 RDX