2008 Acura RDX Owner's Manual - Page 356

Main Menu Table Of Contents Lights 5. Install the new bulb into the hole and turn it one-quarter turn clockwise to lock it in place. 6. Push the electrical connector back onto the bulb. Make sure it is on all the way. 7. Turn on the fog lights to test the new bulb. BULB CONNECTOR Replacing a High-mount Brake Light Bulb SCREWS 3. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. 4. Remove the bulb from the fog light assembly by turning it onequarter turn counterclockwise. 8. Put the undercover in place. Reinstall the clip, and tighten the screw securely. COVERS 1. Remove the two screw covers on the light assembly by prying on the side edge with a flat-tip screwdriver. 2. Remove the screws with a Phillipshead screwdriver, then remove the light assembly from the tailgate. 352 2008 RDX