2008 Acura RDX Owner's Manual - Page 361

Main Menu Table Of Contents Wiper Blades BLADE TABS BLADE REINFORCEMENT 3. Remove the blade from the blade assembly: Find two tabs with a ''SET'' and mark on the wiper blade assembly. The opposite side of the mark is the direction you pull out the wiper blade. Pull out the blade by grabbing the end of the blade as shown above illustration. 4. Examine the new wiper blades. If they have no plastic or metal reinforcement along the back edge, remove the metal reinforcement strips from the old wiper blade, and install them in the slots along the edge of the new blade. 5. Install the new blade onto the blade assembly: Find two tabs with a ''SET'' and mark on the wiper blade assembly. This is the direction you install. Slide the blade onto the assembly until it is locked by the tabs. CONTINUED Maintenance 357 2008 RDX