2007 BMW X5 Owner's Manual - Page 44

Adjusting Adjusting lumbar support* 3. Press the button: The LED in the button lights up. 4. Press the desired memory button 1 or 2: The LED goes out. The driver's seat and exterior mirror positions are stored for the remote control currently in use. Calling up automatically You can also adjust the contour of the backrest to obtain additional support in the lumbar region. The upper hips and spinal column receive supplementary support to help you maintain a relaxed, upright sitting position. > Increase or decrease curvature: press front or rear section of switch. > Shift curvature up or down: press upper or lower section of switch. You can choose when the stored driver's seat and exterior mirror positions are called up. > Calling up when unlocking vehicle > Calling up when opening driver's door When using this feature, always make sure that the footwell behind the driver's seat is empty and unobstructed. Failure to do so could cause injury to persons or damage to objects behind the seat as a result of a rearward movement of the seat.< The system cancels the adjustment procedure when you briefly press one of the seat adjustment switches or one of the memory buttons. Seat, mirror and steering wheel memory* You can store and select two different adjustment settings for the driver's seat, exterior mirrors and steering wheel. The adjustment of the backrest width and lumbar support is not stored in the memory. Selecting calling up automatically iDrive, for explanation of concept, refer to page 16. 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Vehicle / Tires" and press the controller. 5. Change to upper field if necessary. Turn the controller until "Door locks" is selected and press the controller. Storing 1. Switch on radio readiness or ignition, refer to page 56. 2. Set the desired seat, exterior mirror and steering wheel positions. 42 Online Edition for Part no. 01 41 0 012 501 - © 08/06 BMW AG