2007 BMW X5 Owner's Manual - Page 85

Activating driver assistance functions With backup camera switched on iDrive, for explanation of concept, refer to page 16. 1. Press the controller. 2. Select the desired function and press the controller. Displays You can display the picture of the backup camera in various ways. In addition, you can also display the PDC Park Distance Control, refer to page 81. > "Camera view: full screen" The picture of the backup camera is shown on the entire Control Display. > "Camera view: main window" The picture of the backup camera is shown in the main window of the Control Display. > "PDC in main window only" PDC is shown in the main window of the Control Display. With backup camera switched off 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Vehicle / Tires" and press the controller. 5. Change to upper field if necessary. Turn the controller until "Maneuvering aids" is selected and press the controller. Selecting displays 1. Select "Maneuvering aids" and press the controller, refer to Activating functions. 2. Turn the controller until "View selection" is selected and press the controller. 6. Select "Settings" and press the controller. 3. Select the desired display and press the controller. The setting is used for the remote control currently in use. Cleaning backup camera The lens of the backup camera is located in the liftgate over the license plate. The picture quality of the backup camera may be impaired by dirt. Clean the lens with a moist, non-abrasive cloth. In case of frost, a heater in the lens is switched on automatically. 7. Select the desired functions and press the controller. You can also adjust the brightness of the camera view. The settings are used for the remote control currently in use. 83 Online Edition for Part no. 01 41 0 012 501 - © 08/06 BMW AG Reference Mobility Communications Entertainment Navigation Driving tips Controls At a glance