1995 Chevrolet Suburban Owner's Manual - Page 381

Maintenance ScheduleI - Gasoline Engines With Light Duty Emissions (Continued) 0 Check readfront axle fluid level and add fluid as needed. Check constant velocity joints and axle seals for leaking. ** 27,000 Miles (45000 km) 0 Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. 0 Lubricate the front suspension, king pin bushings, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides,rear driveline centersplines, front axle propshaft splines, brake pedal springs and clutch pedal springs. Ball joints and king pin bushings should not be lubricated unless their temperature is 10" F (-12" C), or higher. When weather is cold, let the ball joints and king pin bushings warm up before lubrication or they could be damaged. Perform each of the listed lubrication service items at this mileage interval (or every 6 months, whichever occurs first). 0 Check readfront axle fluid level and add fluid as needed. Check constant velocity joints and axle seals for leaking.** DATE ACTUAL MILEAGE SERVICED BY: 7-1 8