1995 Chevrolet Suburban Owner's Manual - Page 453

(Continued) 0 Rotate tires. See "Tire Inspection and Rotation" in the Index for proper rotation pattern and additional information. See "Tires" in the Index. 0 Check readfront axle fluid level and add fluid as needed. Check constant velocity joints and axle seals forleaking. ** 60,000 Miles (100 000 km) 0 Change engine oil and filter (or every 3 months, whichever occurs first). An Emission ControlService. 0 Lubricate the front suspension, king pin bushings, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides, rear driveline center splines, front axle propshaft splines, brake pedal springs and clutch pedal springs. Ball joints and king pin bushings should not be lubricated unless their temperature is 10" F (-12" C), or higher. When weather is cold, let the ball joints and king pin bushings warm up before lubrication or they could be damaged. Perform each of the listed lubrication service itemsat this mileage interval (orevery 12 months, whichever occurs first). 0 Drain, flush and refill the cooling system with new coolant (or every 24 months, whichever occurs first). See "Engine Coolant" in the Index for what to use. An Emission ControlService. Also inspect the hoses and replace them if they are cracked, swollen or deteriorated. Tighten all hose clamps (except constant tension clamps). Remove debris and clean the outside of the radiator and air conditioning condenser. Wash the radiator neck. To ensure proper operation, pressuretest the radiator and cap. (Continued) 7-90