1995 Chevrolet Suburban Owner's Manual - Page 409

Maintenance Schedule I - Gasoline Engines Heavy Duty Emissions (Continued) 0 Check readfront axle fluid level and add fluid as needed. Check constant velocity joints and axle seals for leaking.** 0 Rotate tires. See "Tire Inspection and Rotation" in the Index for proper rotation pattern and additional information. DATE ACTUAL MILEAGE SERVICED B Y 45,000 Miles (75 000 km) 0 Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. 0 Lubricate the front suspension, king pin bushings, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides,rear driveline center splines, front axlepropshaft splines, brake pedal springs and clutch pedal springs. Ball joints and king pin bushings should not be lubricated unless their temperature is 10" F (-12" C ) , or higher. When weather is cold, let the ball joints and king pin bushings warm up before lubrication or they could be damaged. Perform each of the listed lubrication service items at this mileage interval (or every 12 months, whichever occurs first). Check readfront axle fluid level and add fluid as needed. Check constant velocity joints and axle seals for leaking.** DATE SERVICED ACTUAL MILEAGE BY: