1998 Chevrolet Camaro Owner's Manual - Page 300
1998 Chevrolet Camaro Manual
Page 300 highlights
Wiper Blade Assembly Replacement Replacement bladescome in different types and are removed in different ways. To remove the wiper blade assembly: 1. Lift the wipera m until it locks into an r upright position. 2. Press the locking tab in while sliding the blade assembly down. Wiper Blade Element Replacement To replace the wiper blade element, refer to the wiper blade assembly replacement instructions. replace To the element follow these steps: 1. Locate the heel end the wiper blade assembly that of has the two notches held the wiper blade claw. by 2. Hold the wiper blade assembly with one hand and pull the element gently with the other hand. (Replacement blade elements have three plastic caps which retain two metal flexor strips. not Do remove these caps before the elementinstalled). is of 3. At the heel end the wiper blade assembly, notched end of blade element last, slide the blade element into the blade claw sets. The plastic retainer caps will be forced off the elementis fully inserted. as Make sure that all the claw sets are properly engaged in the slots of the blade element. 4. Install the wiper blade assembly on the wiper arm. For information on wiper blade replacement length and type, see "Capacities and Specifications'' in the Index. 6-42