2003 Chevrolet Malibu Owner's Manual - Page 110

If a bulb is burned out, replace it to help avoid an accident. If the arrows don't go on at all when you signal a turn, check for burned-out bulbs and then check the fuse. See Fuses and Circuit Breakers on page 5-82. Flash-to-Pass Feature This feature lets you use your high-beam headlamps to signal a driver in front of you that you want to pass. To use it, pull the turn signal/multifunction lever toward you until the high-beam headlamps come on, then release the lever to turn them off. Headlamp High/Low-Beam Changer To change the headlamps from low beamto highbeam, push theturn signaVmultifunctionlever away from you. When the high beams are on, a light on the instrument panel cluster also will be on if the ignition is in ON. Windshield Wipers To change the headlamps from high beam to low beam, pull the turn signal lever toward you. Headlamps On Reminder If you open the driver's door and turn off the ignition while leaving the lamps on, you will hear a warning chime. Use this lever located on the right side of the steering wheel to operate the windshield wipers. 3-7