2003 Chevrolet Malibu Owner's Manual - Page 197

Dinghy Towing To tow your vehicle with all four wheels on the ground, follow these steps: m 1. Position the vehicle to tow and then secure it. 4. To prevent your battery from draining while the vehicle is being towed, remove the following fuses from the driver's side instrument panel fuse block: A) Wiper, G) Powertrain Control Module and J) Body Function Control Module. See "Instrument Panel Fuse Block (Driver's Side)" in Fuses and Circuit Breakers on page 5-82 for location of these fuses. 5. Turn the ignition switch to ACCESSORY. 6. Shift your transaxle to NEUTRAL (N). 7. Release the parking brake. Remember to install the fuses once you reach your destination. To reinstall a fuse: 1. Set the parking brake. 2. Remove the key from the ignition switch. 3. Reinstall the fuse. 2. Turn the ignition switch to OFF. 3. Set the parking brake. Notice: Make sure that the towing speed does not exceed 65 mph (110 km/h), or your vehicle could be badly damaged. 4-30