2013 Chevrolet Corvette Owner Manual - Page 156

5-52 Instruments and Controls . Vehicle Personalization Many features on your vehicle can be personalized. This means that the operation of these features can be set to operate differently depending on who is driving the vehicle. See "Personal Options" later in this section for the features that you can personalize. The personalization settings for other features are automatically updated and saved as the driver adjusts them. These include the following settings and presets: . The instrument panel cluster dimming level and last selected DIC display. Separate personalization settings are saved for two different drivers. One of the Remote Keyless Entry (RKE) transmitters is assigned to driver 1. The other is assigned to driver 2. The backs of the RKE transmitters are labelled 1 or 2 to correspond to each driver. The current driver's preferences are recalled when one of the following occurs: . If more than one valid RKE transmitter is detected upon opening the driver door, the driver preferences for the lowest driver number will be recalled. If an RKE transmitter that is not labelled 1 or 2 is used, the personalization system will not recognize the transmitter. The Driver Information Center (DIC) will not display a current driver number and the features that are normally programmed through the DIC will be set to the default states. Also, if the OPTION button is pressed, the DIC does not display the menus used to set personalizations, but instead displays OPTIONS UNAVAILABLE for a few seconds. Entering the Personal Options Menu To enter the personal options menu, use the following steps: 1. If you have an automatic transmission vehicle, turn the vehicle on with the shift lever in P (Park). The radio presets, tone, volume, fade, balance, equalization (EQ) settings, and source (radio or CD). The last climate control setting. The Head-Up Display (HUD) position and dimming level, if your vehicle has this feature. The lock or unlock button on the RKE transmitter, labelled 1 or 2, is pressed. The appropriate memory button, 1 or 2, located on the driver door is pressed. See Memory Seats on page 3‑4 for more information. A valid RKE transmitter is detected upon opening the driver door. . . . .