2013 Chevrolet Corvette Owner Manual - Page 34

2-4 Keys, Doors, and Windows Programming Transmitters to the Vehicle Only RKE transmitters programmed to this vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer. The vehicle can be reprogrammed so that lost or stolen transmitters no longer work. Each vehicle can have up to four transmitters programmed to it. Programming with a Recognized Transmitter A new transmitter can be programmed to the vehicle when there is one recognized transmitter. For vehicles sold in Canada, two recognized transmitters are required to program a new transmitter. 1. The vehicle must be off. 2. Both the recognized and new transmitters must be with you. 3. Insert the vehicle key into the key cylinder located above the license plate. 4. Open the hatch/trunk. 5. Turn the key five times within five seconds. 6. The DIC displays READY FOR FOB #2, 3 or 4. K (Unlock): Press once to unlock only the driver door. Press K twice within five seconds to unlock both doors. The interior lamps may come on. Pressing K also recalls the memory settings. See Memory Seats on page 3‑4 for more information. } (Hatch/Trunk): Press and hold for about one second to unlock the hatch/trunk. If the engine is running, the shift lever must be in P (Park) for an automatic transmission. For a manual transmission, the shift lever must be in N (Neutral) with the parking brake set. L (Panic): Press to sound the horn. Press any other button on the RKE transmitter to stop it. 7. Place the new transmitter in the glove box transmitter pocket with the buttons facing the passenger side. 8. A beep sounds when programming is complete. The DIC displays READY FOR #3 or 4, or MAXIMUM NUMBER OF FOBS LEARNED.