2013 Chevrolet Corvette Owner Manual - Page 95

Seats and Restraints Securing a Child Restraint with a Top Tether WARNING (Continued) tighten. Buckle any unused safety belts behind the child restraint so children cannot reach them. Pull the shoulder belt all the way out of the retractor to set the lock, if the vehicle has one, after the child restraint has been installed. Notice: Do not let the LATCH attachments rub against the vehicle's safety belts. This may damage these parts. If necessary, move buckled safety belts to avoid rubbing the LATCH attachments. Do not fold the empty rear seat with a safety belt buckled. This could damage the safety belt or the seat. Unbuckle and return the safety belt to its stowed position, before folding the seat. Do not secure a child restraint in a position without a top tether anchor if a national or local law requires 3-35 { WARNING If a LATCH-type child restraint is not attached to anchors, the child restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed. Install a LATCH-type child restraint properly using the anchors, or use the vehicle safety belts to secure the restraint, following the instructions that came with the child restraint and the instructions in this manual. that the top tether be attached, or if the instructions that come with the child restraint say that the top tether must be attached. 1. Secure the child restraint using the vehicle's safety belt. See Securing Child Restraints on page 3‑37. 2. If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if equipped. Refer to the child restraint instructions and the following steps: 2.1. Find the top tether anchor. 2.2. Press the ribbed area of the trim cover to open the cover and expose the anchor. { WARNING Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck and the safety belt continues to (Continued)