2010 Chrysler 300 Owner Manual - Page 161
2010 Chrysler 300 Manual
Page 161 highlights
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Resume Speed If you deactivated the Electronic Speed Control without erasing the set speed from memory and your vehicle speed is above 20 mph (32 km/h) you can resume the previous set speed. To do so, push the lever upward to • The Electronic Speed Control may not engage if a RESUME ACCEL and release. Then remove your foot different size tire is installed on one wheel, such as the from the accelerator pedal. compact spare tire. To Vary the Speed Setting To Deactivate When the Electronic Speed Control is set, you can inThe system will disable Electronic Speed Control without crease speed by pushing up and holding the RESUME erasing the memory if you: ACCEL lever. If the lever is continually held in the • Softly tap the brake pedal. RESUME ACCEL position, the set speed will continue to increase until the lever is released, then the new set speed • Press the brake pedal. will be established. • Pull the Electronic Speed Control lever toward you Tapping the Electronic Speed Control lever to RESUME (CANCEL). ACCEL once will result in a 1 mph (1.6 km/h) speed Pushing and releasing the ON/OFF button or turning the increase. Each time the lever is tapped speed increases, so tapping the lever three times will increase speed by ignition OFF erases the set speed from memory. 3 mph (4.8 km/h), etc. NOTE: • Electronic Speed Control will only function in 3rd, 4th, or 5th gear when in the Autostick mode (if equipped).