2010 Chrysler 300 Owner Manual - Page 25

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Lock the Doors • For vehicles not equipped with the EVIC, perform the Press and release the LOCK button on the RKE transmitfollowing procedure: ter to lock all doors. The turn signal lights will flash and 1. Press the LOCK button on a programmed RKE transthe horn will chirp to acknowledge the signal. mitter for at least 4 seconds, but no longer than 10 secIf the vehicle is equipped with Passive Entry, refer to onds. Then, press the PANIC button while still holding "Passive Entry System - If Equipped" under "Door the LOCK button. Locks" for further information. 2. Release both buttons at the same time. Sound Horn with Remote Key Lock 3. Test the feature while outside of the vehicle by pressThis feature will cause the horn to chirp when the doors ing the LOCK button on the RKE transmitter with the are locked with the RKE transmitter, or locked using the ignition switch in the LOCK position and the key rePassive Entry door handle lock button (if equipped). This moved. feature can be turned on or turned off. To change the current setting, proceed as follows: 4. Repeat these steps if you want to return this feature to its previous setting. • For vehicles equipped with the EVIC, refer to "Electronic Vehicle Information Center (EVIC) - If NOTE: Pressing the LOCK button on the RKE transmitEquipped/Personal Settings (Customer- ter while you are in the vehicle will activate the security Programmable Features)" in "Understanding Your Instrument Panel" for further information.