2010 Chrysler 300 Owner Manual - Page 23
2010 Chrysler 300 Manual
Page 23 highlights
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Settings (Customer-Programmable Features)" in "Un- NOTE: Pressing the LOCK button on the RKE transmitderstanding Your Instrument Panel" for further infor- ter while you are inside the vehicle will activate the security alarm. Opening a door with the Vehicle Security mation. Alarm armed will cause the alarm to sound. Press the • For vehicles not equipped with the EVIC, perform the UNLOCK button to deactivate the security alarm. following procedure: Flash Lights with Remote Key Lock 1. Press and hold the LOCK button on a programmed This feature will cause the turn signal lights to flash when RKE transmitter for at least 4 seconds, but no longer than the doors are locked with the RKE transmitter. When this 10 seconds. Then, press and hold the UNLOCK button feature is turned on and the vehicle is equipped with the while still holding the LOCK button. Passive Entry system, using the Passive Entry system to LOCK the vehicle will cause the parking lights to flash. 2. Release both buttons at the same time. This feature can be turned on or turned off. To change the 3. Test the feature while outside of the vehicle by presscurrent setting, proceed as follows: ing the LOCK/UNLOCK buttons on the RKE transmitter with the ignition switch in the OFF position and the key • For vehicles equipped with the EVIC, refer to "Electronic Vehicle Information Center (EVIC) - If removed. Equipped/Personal Settings (Customer4. Repeat these steps if you want to return this feature to Programmable Features)" in "Understanding Your Inits previous setting. strument Panel" for further information.