2010 Chrysler 300 Owner Manual - Page 314

STARTING AND OPERATING 313 WARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery, booster cables may be used to obtain a start from a booster battery or the battery in another vehicle. This type of start can be dangerous if done improperly. Refer to "Jump Starting" in "What To Do In Emergencies" for further information. and hold the brake pedal, push the accelerator pedal all the way to the floor and hold it, then press and release the ENGINE START/STOP button once. The starter motor will engage automatically, run for 10 seconds, and then disengage. Once this occurs, release the accelerator pedal and the brake pedal, wait 10 to 15 seconds, then repeat the "Normal Starting" procedure. Clearing A Flooded Engine (Using Fob With Integrated Key) If the engine fails to start after you have followed the "Normal Starting" or "Extreme Cold Weather" procedures, it may be flooded. To clear any excess fuel, push the accelerator pedal all the way to the floor and hold it. Then, turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor Clearing a Flooded Engine (Using ENGINE will disengage automatically in 10 seconds. Once this START/STOP Button) If the engine fails to start after you have followed the occurs, release the accelerator pedal, turn the ignition "Normal Starting" or "Extreme Cold WeatherЉ proce- switch to the LOCK position, wait 10 to 15 seconds, then dures, it may be flooded. To clear any excess fuel, press repeat the "Normal Starting" procedure. 5