2011 Chrysler Town & Country Owner Manual - Page 168

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 A recall can be cancelled by pressing any of the MEMORY buttons on the driver's door during a recall (S, 1, or 2). When a recall is cancelled, the driver's seat, driver's mirror, and the pedals stop moving. A delay of one second will occur before another recall can be selected. To Disable RKE Transmitter Linked To Memory 4. Within five seconds, press and release MEMORY button 1 on the driver's door. A chime will sound signaling to you that the driver memory has been set. 5. Within five seconds, press and release the UNLOCK button on the RKE transmitter. A chime will sound signaling to you that the RKE transmitter link has been successfully disabled. 3 1. Turn the ignition switch to the OFF position and To disable another RKE transmitter linked to either remove the key. Memory Position, repeat Steps 1 to 5 for each RKE transmitter. 2. Press and release MEMORY button 1. The system will recall any memory settings stored in position 1. Wait for NOTE: Once programmed, all RKE transmitters linked the system to complete the memory recall before continu- to memory can be easily enabled or disabled at one time. ing to Step 3. Refer to "Electronic Vehicle Information Center (EVIC)/ Customer-Programmable FeaturesЉ in "Understanding 3. Press and release the memory SET (S) button located Your Instrument Panel" for further information. on the driver's door. A chime will sound signaling that you are in the memory set mode.