2011 Chrysler Town & Country Owner Manual - Page 271

268 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The system will display the last known outside temperature when starting the vehicle and may need to be driven several minutes before the updated temperature is displayed. Engine temperature can also affect the displayed temperature; therefore, temperature readings are not updated when the vehicle is not moving. CMTC Reset Buttons CMTC Reset Button Press the STEP button located on the steering wheel to scroll through sub menus (i.e., Trip Functions: AVG Fuel Economy, DTE, Elapsed Time, and Units). When the appropriate conditions exist, the following messages will display: NE ...Eight-point compass headings are displayed (N, S, E, W, NE, NW, SE, SW) 14°F ...Temperature (Fahrenheit or Celsius) AVG ...Average Fuel Economy (U.S. or Metric) DTE ...Distance to Empty ET ...Elapsed Time P...Park Assist On/Off Should this wrench symbol display with the letter P next to it, your Park Assist System needs servicing. Contact an authorized dealer. To reset the display shown, turn the ignition switch to the ON position, then press and hold the RESET button for CMTC Trip Odometer (ODO) approximately two seconds. This display shows the distance traveled since the last reset. Press and release the STEP button on the steering wheel to switch from odometer to Trip A or Trip B or to ECO. Press and hold the RESET button while the odometer/trip odometer is displayed to reset.