2011 Chrysler Town & Country Owner Manual - Page 267

264 UNDERSTANDING YOUR INSTRUMENT PANEL Operation of the Brake Warning Light can be checked by turning the ignition switch from the OFF position to the ON/RUN position. The light should illuminate for approximately two seconds. The light should then turn off unless the parking brake is applied or a brake fault is detected. If the light does not illuminate, have the light inspected by an authorized dealer. 19. Seat Belt Reminder Light When the ignition switch is first turned to ON/ RUN, this light will turn on for four to eight seconds as a bulb check. During the bulb check, if the driver or front passenger's seat belt is unbuckled, a chime will sound. After the bulb check or when driving, if the driver's seat belt remains unbuckled, the Seat Belt Reminder Light will illuminate and the chime will sound. The light also will turn on when the parking brake is Refer to "Occupant Restraints" in "Things To Know applied with the ignition switch in the ON/RUN posiBefore Starting Your Vehicle" for further information. tion. 20. Temperature Gauge NOTE: This light shows only that the parking brake is The temperature gauge shows engine coolant temperaapplied. It does not show the degree of brake application. ture. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher temperature when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range.