2011 Chrysler Town & Country Owner Manual - Page 178

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 SmartBeam™ - If Equipped The SmartBeam™ system provides increased forward lighting at night by automating high beam control through the use of a digital camera mounted on the inside rearview mirror. This camera detects vehicle specific light and automatically switches from high beams to low beams until the approaching vehicle is out of view. NOTE: This system will not activate until the vehicle is at, or above, 25 mph (40 km/h). To Deactivate Perform either of the following steps to deactivate the SmartBeam™ system. 1. Select "Automatic High Beams - OFF" through the EVIC. Refer to "Electronic Vehicle Information Center To Activate (EVIC)/Customer-Programmable Features" in "Under1. Select "Automatic High Beams - ON" through the standing Your Instrument Panel" for further information. EVIC. Refer to "Electronic Vehicle Information Center 2. Pull the multifunction lever toward you to switch the (EVIC)/Customer-Programmable Features" in "Underheadlights from the high beam to the low beam position. standing Your Instrument Panel" for further information. 3. Rotate the headlight switch clockwise from the AUTO 2. Rotate the headlight switch counterclockwise to the (A) to the on position. AUTO (A) position. NOTE: Broken, muddy or obstructed headlights and 3. Push the multifunction lever away from you to switch taillights of vehicles in the field of view will cause the headlights to the high beam position. Refer to "Mulheadlights to remain on longer (closer to the vehicle). tifunction Lever" in this section for further information. 3