2011 Chrysler Town & Country Owner Manual - Page 177

174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Headlight Beams Low/High • Flash-To-Pass (Optical Horn) • Front and Rear Wipers - Washer Functions Turn Signals Move the multifunction lever up or down and the arrows High/Low Beam Switch on each side of the instrument cluster flash to show When the headlights are turned on, pushing the multiproper operation of the front and rear turn signal lights. function lever toward the instrument panel will switch from low beams to high beams. Pulling back to the NOTE: If either light remains on and does not flash, or neutral position returns the headlights to the low beam there is a very fast flash rate, check for a defective outside operation. light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is Flash-To-Pass You can signal another vehicle with your headlights by defective. lightly pulling the multifunction lever toward you. This Lane Change Assist will turn on the high beam headlights until the lever is Tap the lever up or down once, without moving beyond released. the detent, and the turn signal (right or left) will flash three times then automatically turn off. Turn Signal Warning If the vehicle electronics sense that the vehicle has traveled at over 18 mph (29 km/h) for approximately 1 mile (1.6 km) with the turn signals on, a chime will sound to alert the driver.