2011 Chrysler Town & Country Owner Manual - Page 351

348 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Rotate the Rear Blower, Rear Temperature and the Rear Mode Control knobs to suit your comfort needs. 3. ATC is selected by adjusting the rear blower knob Rear Blower Control counterclockwise to AUTO. The rear blower control knob can be manually set to off, Once the desired temperature is displayed, the ATC or any fixed blower speed, by rotating the knob from low System will automatically achieve and maintain that to high. This allows the rear seat occupants to control the comfort level. When the system is set up for your comfort volume of air circulated in the rear of the vehicle. level, it is not necessary to change the settings. You will experience the greatest efficiency by simply allowing the CAUTION! system to function automatically. Interior air enters the Rear Automatic Temperature NOTE: Control System through an intake grille, located in • It is not necessary to move the temperature settings for the right side trim panel behind the third row seats. cold or hot vehicles. The system automatically adjusts The heater outlets are located in the right side trim the temperature, mode and fan speed to provide panel, just behind the sliding door. Do not block or comfort as quickly as possible. place objects directly in front of the inlet grille or • The temperature can be displayed in English or Metric heater outlets. The electrical system could overload units by selecting the "Display Units of Measure in" causing damage to the blower motor. customer-programmable feature. Refer to the "Electronic Vehicle Information Center (EVIC) - CustomerProgrammable Features" in this Section.