2014 Chrysler 300 Owner Manual SRT - Page 190

188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE equipped], power tilt and telescopic steering column NOTE: Before programming your RKE transmitters you must select the "Memory To FOB" feature through the [if equipped], and radio station presets). Uconnect® system screen. Refer to "Customer- Program3. Press and release the S (Set) button on the memory mable Features - Uconnect® Access 8.4 Settings " in switch. "Understanding Your Instrument Panel" for further in4. Within five seconds, press and release either of the formation. memory buttons (1) or (2). The Electronic Vehicle To program your RKE transmitters, perform the followInformation Center (EVIC) will display which ing: memory position has been set. 1. Remove the Key Fob from the ignition (or change the NOTE: Memory profiles can be set without the vehicle ignition to OFF, for vehicles equipped with Keyless in PARK, but the vehicle must be in PARK to recall a Enter-N-Go™). memory profile. 2. Select desired memory profile (1) or (2). The system Linking And Unlinking The Remote Keyless Entry will recall any stored settings for this profile. Wait for Transmitter To Memory the system to complete the memory recall before continuing to Step 3. Your RKE transmitters can be programmed to recall one of two pre-programmed memory profiles by pressing the UNLOCK button on the RKE transmitter.