2014 Chrysler 300 Owner Manual SRT - Page 357

UNDERSTANDING YOUR INSTRUMENT PANEL 355 10. Blower Control Blower control is used to regulate the amount of air forced through the climate system. There are seven blower speeds available. Adjusting the blower will cause automatic mode to switch to manual operation. The speeds can be selected using either hard-keys or soft-keys as follows: Hard-Key 11. Modes The airflow distribution mode can be adjusted so air comes from the instrument panel outlets, floor outlets, demist outlets and defrost outlets. The Mode settings are as follows: • Panel Mode Air comes from the outlets in the instrument panel. Each of these outlets can be individually The blower speed increases as you turn the control adjusted to direct the flow of air. The air vanes of the clockwise from the lowest blower setting. The blower center outlets and outboard outlets can be moved up and speed decreases as you turn the knob counterclockwise. down or side to side to regulate airflow direction. There is a shut off wheel located below the air vanes to shut off Soft-Key or adjust the amount of airflow from these outlets. Use the small blower icon to reduce the blower setting • Bi-Level Mode and the large blower icon to increase the blower setting. Blower can also be selected by pressing the blower bar Air comes from the instrument panel outlets and area between the icons. floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. 4